How to Remove Jeans Button and Rivet
How to Remove Jeans Button and Rivet
When the rivet buttons on your favorite jeans break, do you choose to repair them yourself or find a professional tailor to fix them? Actually, removing jeans buttons at home is easy to do, requiring only some simple household tools and a few tricks. If you're interested, keep reading. This guide will teach you how to remove both jeans buttons and rivets.
Understanding Jeans Buttom Types
Before you start removing buttons from jeans, it is important to understand the type of button you are dealing with. Different types of buttons require different tools and techniques. Misidentifying a button can cause unnecessary fabric damage and even lead to a lot of trouble.
Below are the most common types of buttons found on jeans and denim jackets.
1. Rivet-Style (Tack) Buttons
Rivet buttons (commonly referred to as tack buttons) are the most common fasteners on jeans, consisting of a button cap and a tack post. They are difficult to remove and require prying or cutting tools.
2. Shank Jeans Buttons
Shank buttons resemble rivet buttons but have a ring-shaped metal or plastic "shank" on the back, allowing for easy attachment and removal, as well as reusability.
3. Sew-On Jeans Buttons
Sew-on buttons are commonly used on soft denim shirts or by fashion brands. These buttons are sewn on with visible thread and can be easily removed using a seam ripper or scissors.
4. No-Sew (Snap-In) Jeans Buttons
No-sew buttons are pre-made fastening buttons that can be pressed in by hand or hammered in. They are designed for easy replacement and are typically included in repair toolkits.
Tools You Need to Remove a Jeans Button and rivet
Pliers (Needle-Nose or Adjustable)
Flathead Screwdriver
Wire Cutters or Metal Nippers
Protective Cloth or Scrap Fabric
Cut-Resistant Gloves
Hammer & Anvil or Metal Block
Needle File or Sandpaper
Method 1 – Removing a Rivet Button with Pliers and Screwdriver
Step 1: Lay the Jeans on a Flat, Protected Surface
Step 2: Locate and Support the Button Area
Step 3: Use Pliers to Grip the Button Cap
Step 4: Insert the Screwdriver to Create Separation
Step 5: Loosen and Remove the Back Tack
Step 6: Clean the Area and Check for Damage
How to Replace a Removed Jeans Button
Option 1: Use a No-Sew Replacement Jeans Button
This is the easiest method and requires no special tools. These buttons come in kits and are available online or at most craft stores.
1.Align the tack post through the hole on the back side of the waistband.
2.Place the button cap over the front.
3.Hammer the top gently but firmly until secure.
Option 2: Install a Screw or Rivet-Style Button (More Durable)
1.Create a clean hole where the button was removed.
2.Insert the tack post from the back side.
3.Align the button cap on the outside.
Use a hammer or screwdriver (depending on button type) to fasten